Search

MOTOPUMPS - ZUMO XT / XT2 / TREAD SECURITY MOUNT KIT

Locking Mount For the Garmin Zumo XT, XT2 and Garmin Tread 5.5 GPS Units

***Note - If you have purchased the Group Ride Radio add on module, the antenna interferes with the locking mechanism***

Peace of mind for your expensive GPS!


MotoPumps® Locking Security Mount for the Garmin® Zumo XT and XT2 and Garmin Tread 5.5 GPS is here. This mount combines two of our extremely popular products, the Zumo XT/XT2 Security Lock and our AMPS pattern GPS mount in one unit.

If you already have a full GPS mount and just need the Garmin® Zumo XT / XT2  Tread Security Lock:  CLICK HERE

MotoPumps® developed the GPS mount after being frustrated with the heavy, fragile, overly large, complex and expensive offerings. Machined from 6061 billet aluminum and DuPont Delrin™, the mount is strong, stable, light and 100% weather/corrosion resistant. We created the Garmin® Zumo XT/XT2/Tread Security Lock because Garmin didn’t provide any anti-theft protection into the otherwise stellar Zumo XT, XT2 and Tread GPS units. When both of those products were flying out the doors of our shop, we decided to combine the two and offer them at a lower price than the individual pieces. We make them right here in Beautiful Upstate NY.

Mounting hardware is stainless steel and designed for the Zumo XT/XT2/Tread powered cradle that came with your Garmin® Zumo XT/XT2/Tread GPS. Choose the clamp diameter that fits the crossbar of your bike. They are available in 12mm, 14mm, 16mm, 22mm, 25mm and 28mm. If you don’t know the diameter of the cross bar on your bike and don’t have a caliper to measure the diameter, break out your open ended wrenches and see which one matches the diameter of the bar. We also have a list of known fitments below.

Installation is a snap! Your kit consists of the combination AMPS plate and security lock, 12, 14, 16 22, 25, or 28mm clamps, 304 stainless proprietary stainless security pin, two 304 stainless matching security keys, stainless M4 mounting hardware and instructions. The mounting plate has both horizontal and vertical AMPS pattern and clamp holes so you can go portrait or landscape to suit your mounting needs. The 12mm and 14mm clamps are height adjustable in 3 positions, the 16mm and 22mm clamps height adjustable in two positions.

Note: GPS Cradle not included. The pictured GPS cradle is for a Garmin Zumo XT/XT2 and Tread 5.5 that came with the GPS unit when purchased new.

Known Fitments:

12mm

  • Honda Africa Twin 2016-19
  • Camel ADV Brace Kit for AT
  • Honda CB500x 2019-20
  • BMW R1200 GS / A ‘14-18
  • All BMW R1250 GS and GSA
  • All Yamaha Tenere 700
  • 2014 Yamaha Super Tenere XTZ1200
  • Aprilia Tuareg 660.


14mm

  • 2022+ Kawasaki KLR650 (all models)


16mm

  • BMW R1200 GS and GSA ‘05-’13
  • Benelli TRK 502X 2021
  • 2014-2017 BMW F800 GS Adventure

22mm / 7/8”

  • All VStrom 1050 models.
  • Honda CFR250L Rally
  • Honda CRF300L Rally
  • All 7/8” handlebars

25mm 1”

  • All 1 inch handlebars

28mm / 1 1/8"

  • All Inch and an eighth handlebars


Pro Tip - If you don’t have a caliper to measure the mounting point on your bike, get an open ended wrench out and see what fits over the mounting point.

For a spare mounting bracket for Garmin Zumo XT / Tread 5.5:  CLICK HERE

For a spare mounting bracket for Garmin Zumo XT2:  CLICK HERE

For spare MotoPumps security key: CLICK HERE

For spare MotoPumps security pin: CLICK HERE

For Garmin Zumo XT2:  CLICK HERE

Still not sure - email us here:  info@upshiftonline.com


Search